Unpacking The Appliance; Description Of The Appliance; Eldc300Xl - Gastro-Cool ELDC300XL Instructions For Use Manual

3

Unpacking the appliance

The packaging must be undamaged. Check the refrigerator for
any damage that has occurred during transportation. Under no
circumstances plug in a damaged appliance. If damage has occurred,
please contact the supplier.
WARnInG
! ! ! !
Items of packaging (e.g. films, polystyrene) may be
dangerous for children. Risk of suffocation! Keep
packaging materials away from children.
Disposal of packaging materials
Ensure that they are disposed of in an environmentally friendly manner.
Removal of transportation protection elements
The appliance and some of the interior fittings are protected for
transportation. Remove all adhesive tape. Adhesive residues can be
removed using cleansing spirit. Remove all adhesive tape and items
of packaging from the interior of the appliance.
GcDc1050 – install bottom cover plate
For the model GCDC1050, unpacked the bottom cover plate, take
out the screws and screwdriver from the plastic bag and install the
bottom cover plate by screwdriver in front of the cooler.
38
4

Description of the appliance

4.1 ELDc300XL

1. Body
2. Canopy right cover
3. Light box
4. Canopy left cover
5. Light switch
6. Up hinge
7. Glass door
8. Down hinge
9. Compressor compartment front cover
10. Lock assemblies
11. Thermostat
12. Gasket
13. Evaporator fan motor cover
14. Evaporator cover
15. Evaporator fan motor
16. Evaporator
17. Light holder for the inner light
18. Light tube in the cabinet
19. Light cover for the inner light
20. Light starter
21. Starter holder
22. Light tube
23. Light support plate
24. Canopy light holder
2 5. Light fixing plate
26. Top plate
27. Outside condenser
2 8. Condenser fixing clip
29. Compressor compartment back plate
30. Power wire
31. Inner wire
32. Filter
33. Compressor
34. Compressor fixing plate
35. Wire box
36. Castor
37. Adjustable foot
38. Pilaster
39. K-Clip
40. Shelf
41. Wire rack front PVC profile
42. Castor
43. Lamp holder
39