Advertisement
2
1
Filter
Filter 2: High-efficiency formaldehyde removal
HEPA filter
7
Put filter 1 (pre-filter) back into the appliance.
Note: Make sure that the side with the two projections is
pointing towards you.
Note: Make sure that all hooks are properly attached to the
appliance.
8
To reattach the front panel, insert the bottom hooks into
the bottom of the appliance first (1). Then push the panel
against the body of the appliance (2).
9
Put the plug in the wall socket and switch on the appliance
again.
10
Press the filter reset button with a thin tool.
Note: You do not need to press the filter reset button after
cleaning filter 1 (pre-filter).
Note: You cannot reset the appliance when you replace a
filter before its filter replacement light starts flashing.
Note: You cannot reset the appliance if it is not plugged in
and switched on.
Storage
To store the mains cord, wind it round the cord storage facility
at the bottom of the appliance.
Accessories
New filters are available under the following type numbers:
Type number
AC4147
ENGLISH
17
Advertisement
