Table of Contents
Advertisement
54
X32 DIGITAL MIXER Preliminary User Manual
7.4.5 Routing Screen: Card Output Tab:
The routing screen's card tab allows the user to patch various signal paths to the
physical inputs and outputs of the X-USB card. The X-USB's signal path provides
32 channels of inputs and 32 channels of outputs. The 32 card inputs can be used
as alternate sources for the two input fader layers, switchable in banks of 8.
To assign an output path to the option card, perform the following steps:
1. Adjust the 1st encoder to select which 8-channel output path to send to the
first 8 outputs of the card. Choices include:
•
Local 1-8
•
Local 9-16
•
Local 17-24
•
Local 25-32
•
AES50-A 1-8
•
AES50-A 9-16
•
AES50-A 17-24
•
AES50-A 25-32
•
AES50-A 33-40
•
AES50-A 41-48
•
AES50-B 1-8
•
AES50-B 9-16
•
AES50-B 17-24
•
AES50-B 25-32
•
AES50-B 33-40
•
AES50-B 41-48
•
Card 1-8
•
Card 9-16
•
Card 17-24
•
Card 25-32
•
Out 1-8
•
Out 9-16
•
P16 1-8
•
P16 9-16
•
Aux 1-6/Mon
2. Tap the 1st encoder to assign the selected output path,
completing the process.
3. Repeat the process with encoders 2-4 to select output paths for the other
24 channels of card outputs.
7.4.6 Routing Screen: AES50-A and AES50-B Tabs:
The routing screen's AES50-A and AES50-B tabs allow the user to patch various
console output paths to the outputs of the dual AES50 connectors. These AES50
connectors can feed other AES50 equipped devices such as a digital stagebox or
standalone multi-track recorder.
The console contains two separate AES50 connectors, an "A" connector and a
"B" connector. These dual connectors allow for an increased level of flexibility in
networking the console with various AES50 based equipment.
Each of the two AES50 screens contains the same following sets of parameters
that can be adjusted. To assign various console signal paths to the AES50
connectors, perform the following steps:
1. Adjust the 1st encoder to select an 8-channel signal path that will be sent to
the first 8 channels of the AES50 connectors output. Choices include:
•
Local 1-8
•
Local 9-16
•
Local 17-24
•
Local 25-32
•
AES50-A 1-8
•
AES50-A 9-16
•
AES50-A 17-24
•
AES50-A 25-32
•
AES50-A 33-40
•
AES50-A 41-48
•
AES50-B 1-8
•
AES50-B 9-16
•
AES50-B 17-24
•
AES50-B 25-32
•
AES50-B 33-40
•
AES50-B 41-48
•
Card 1-8
•
Card 9-16
•
Card 17-24
•
Card 25-32
•
Out 1-8
•
Out 9-16
•
P16 1-8
•
P16 9-16
•
Aux 1-6/Mon
2. Tap the 1st encoder to connect the currently selected signal path to the
AES50 pathway.
3. Repeat the above process for the other five sets of 8-channel AES50 outputs.
The AES50-B tab works exactly the same as the AES50-A screen, but instead
selects sources sent to the output of the console's AES50-B connector.
7.4.7 Routing Screen: XLR out tab:
The XLR tab allows the rear panel XLR outputs to be reassigned in blocks of 4.
Each encoder can be adjusted to select the desired source, and pressed to confirm
the selection.
Advertisement
Table of Contents
