11
X32 DIGITAL MIXER Preliminary User Manual
LeOnde.mp3
00.05.00
00.00.00
con g
home
Bus Con guration
clip
-6
-12
-18
Link
-24
-30
-36
-42
-48
-54
Gain
00.00
dB
Link
The configuration of Mix Bus Channels 1-16 can be pre-set (in the Setup/Global
page) or can also be configured on an individual, per-channel basis. The bus
processing includes (in this order):
•
Insert point (swappable between post-EQ and pre-EQ operation)
•
6-band fully parametric EQ
•
Compressor/expander (swappable between post-EQ and pre-EQ operation)
•
Bus sends to 6 matrices
•
Main LR panning
•
Mono/Center level
Main Bus Channels LR/C are always available and independent from Mix Buses.
The processing steps for this signal path include (in this order):
•
Insert point (swappable between post-EQ and pre-EQ operation)
•
6-band fully parametric EQ
•
Compressor/expander (swappable between post-EQ and pre-EQ operation)
•
Bus sends to 6 matrices
13:44:43
29 November 2010
gate
dyn
eq
Bus Insert Position
∑
Channel Sends
Pre
All Channel Sends
Pre Con guration
...
Inputs
Pre EQ
Pre Fader
Post Fader
Sub Grou
Send Pos.
Inputs
Bus Sends
MyProj.prj
Scene01
sends
main
Insert
Post
Insert
Ins 01
Ins 02
Ins 03
Ins 04
...
FX 01
FX 02
Insert Pos.
Insert
Pre
Insert
Connect
Matrix Channels 1-6 are fed exclusively by MAIN LRC and Mix Bus 1-16 signals.
The processing steps include (in this order):
•
Insert point (swappable between post-EQ and pre-EQ operation)
•
6-band fully parametric EQ
•
Compressor/expander (swappable between post-EQ and pre-EQ operation)
Effects Processing 1-8
The X32 console contains eight true-stereo internal effects engines.
•
FX 1-4 can be configured as side chain or insert effects, while FX 5-8 can only
be used in insert points of channels or buses
•
The returns of side chain FX 1-4 can always be controlled using the 3rd bank
(layer) of the input channels - Aux/USB/FX Returns. Note that the return
signals of FX 1-4 have separate faders for left and right
•
The FX Home screen allows selection of the FX 1-4 input sources and selecting
the effects type/algorithm for each of the 8 FX slots of the virtual rack
•
The subsequent tabs FX 1-FX 8 of the FX screen allow editing all parameters
of the chosen effects processor