Brother MFC-J6535DW Basic User's Manual page 78

IMPORTANT
• If the print head is in the right corner as
shown in the illustration, you cannot move
the print head. Close the scanner cover,
and then reconnect the power cord. Open
the scanner cover again, and then hold
down until the print head moves to the
center. Then unplug the machine from the
power source and take out the paper.
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If ink gets on your skin or clothing,
immediately wash it off with soap or
detergent.
8
Gently close the scanner cover using
the finger holds on each side.
9
(MFC-J6535DW) Slowly push Tray #1
completely into the machine.
(MFC-J6935DW) Slowly push Tray #1
and Tray #2 (if removed) completely into
the machine.
10
Reconnect the power cord.
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine.
See Related Information: Remove Paper
Scraps.
64