Brother MFC-J6535DW Basic User's Manual page 59

Error Message
Paper Size
Mismatch
Paper Size
Mismatch [Tray
#1]
Paper Size
Mismatch [MP
Tray]
Paper Size
Mismatch [Tray
#2]
Paper Tray #1 not
detected
Paper Tray #2 not
detected
Repetitive No
Paper Fed
Repetitive Paper
Jams
Replace Ink
Touchscreen
Initialization
Failed
Action
1. Check that the paper size you selected on the machine's display
matches the size of the paper in the tray.
See Related Information: Change the Paper Size and Paper Type
at the end of this section.
2. Make sure you loaded the paper in the proper orientation and set
the paper guides at the indicators for your paper size.
See Related Information: Load Paper at the end of this section.
3. After you have checked the paper size and the paper orientation,
follow the LCD instructions.
If printing from your computer, make sure the paper size you selected
in the printer driver matches the size of paper in the tray.
For more information, see the Online User's Guide: Print Settings
®
(Windows ) or Print Options (Macintosh).
Slowly push the paper tray completely into the machine.
Paper or a foreign object has prevented the paper tray from being
inserted properly.
Pull the paper tray out of the machine, and remove the jammed paper
or foreign object. If you cannot find or remove the jammed paper, see
Related Information: Printer Jam or Paper Jam at the end of this
section.
Clean the paper pick-up rollers.
For more information, see the Online User's Guide: Clean the Paper
Pick-up Rollers.
Remove any foreign objects and paper scraps in the machine.
See Related Information: Remove Paper Scraps at the end of this
section.
One or more of the ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more information, see the Online User's Guide: Replace the Ink
Cartridges.
• You can still scan even if the ink is low or needs to be
replaced.
The Touchscreen was pressed before the power on initialization was
completed.
Make sure nothing is touching or resting on the Touchscreen,
especially when plugging the machine in.
Debris may be stuck between the lower part of the Touchscreen and
its frame.
Insert a piece of stiff paper between the lower part of the Touchscreen
and its frame and slide it back and forth to push out the debris.
45