Brother MFC-J6535DW Basic User's Manual page 60

Error Message
Tray #1 Settings
Tray #2 Settings
MP Tray Settings
Unable to Clean
XX
Unable to
Initialize XX
Unable to Print
XX
Unable to Scan XX Disconnect the machine from the power for several minutes, and then
Unusable Device
Disconnect device
from front
connector & turn
machine off &
then on
Unusable Device
Please disconnect
USB device.
Wrong Document
Size Settings
Wrong Ink
Cartridge
Action
This message is displayed when the setting to confirm the paper type
and size is enabled.
To not display this confirmation message, change the setting to Off.
See Related Information: Change the Check Paper Size Setting at the
end of this section.
A foreign object, such as a paper clip or a piece of ripped paper, is in
the machine.
Open the scanner cover and remove any foreign objects and paper
scraps from inside the machine. If the error message continues,
disconnect the machine from the power for several minutes, and then
reconnect it.
You can try additional paper jam clear operations.
See Related Information: Remove Paper Scraps at the end of this
section.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more information, see the Online User's Guide: Transfer Your
Faxes or Fax Journal Report.
reconnect it.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more information, see the Online User's Guide: Transfer Your
Faxes or Fax Journal Report.
A broken device is connected to the USB direct interface.
Unplug the device from the USB direct interface, then press
turn the machine off and then on again.
A USB device or USB flash drive that is not supported has been
connected to the USB direct interface.
Unplug the device from the USB direct interface. Turn the machine off
and then on again.
Select the correct document size option, and then press Fax Start
again.
The ink cartridge model number is not compatible with your machine.
Verify whether the cartridge model number will work with your
machine.
See Related Information: Supply Specifications at the end of this
section.
to
46