Brother MFC-J6535DW Basic User's Manual page 64

• Change the LAN cable for a new one.
• Use a different LAN port on your hub.
• Make sure your machine's wired connection is on.
For a wireless network connection:
• Confirm your machine's wireless status on the LCD.
Your machine is not connected to the wireless access point. Set up the wireless
network connection.
The wireless connection setting is disabled. Enable the WLAN connection and
set up the wireless network connection.
The wireless access point cannot be detected. Set up the wireless network
connection again.
The wireless network is connected. A three-level indicator in the LCD displays
the current wireless signal strength.
You can configure wireless settings by pressing the wireless status button.
If you cannot print on both sides of paper, check the following:
6
Change the paper size setting in the printer driver to Letter.
50