Table of Contents
Advertisement
Playing a tape (continued)
To search for the beginning of a
track (AMS)
Press ) to search forward or 0 to search
backward when playing the front side (or
vice-versa when playing the reverse side).
When you use the remote, press = or +.
The search direction, + (forward) or –
(backward), and number of songs being
skipped (1 - 9) appear in the display.
Example: searching forward 2 songs
Tips
• Pressing · or ª while the system power is off
automatically turns on the system and starts tape
playback if there is a tape in the deck (One Touch
Play).
• You can switch from another source to the tape
deck by pressing · or ª (Automatic Source
Selection).
• You can fast-forward or rewind the tape,
regardless of the selected source.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR so
"DOLBY NR B" appears in the display.
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– If completely different information is recorded on
the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
– When the system is placed near a TV. (In this case,
we recommend moving the system farther away
from the TV or turning off the TV.)
20
Recording from a
tape
— High-speed Dubbing
You can use TYPE I (normal) or TYPE II
(CrO
) tapes. The recording level is
2
automatically adjusted.
1/u
(Power)
3
1
p
1
Press PUSH 6 and insert a recorded
tape in deck A and a blank tape in
deck B.
With the side you want to
play/record on facing forward
2
Press H SPEED DUB.
Deck B stands by for recording.
4
2
1
p
Advertisement
Table of Contents
