Table of Contents
Advertisement
Recording a VIDEO CD/CD
(continued)
2
Press PUSH OPEN and place a CD.
With the label
side up.
When you play a
CD single, place it
on the inner
circle of the tray.
3
Close the front cover.
4
Press DISC SKIP repeatedly until
the disc number you want to record
appears in the playing position
indicator.
5
Press CD SYNC.
Deck B stands by for recording, the CD
player stands by for playback, and the
indicator on the · button (for the front
side) lights up green.
6
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
7
Press P.
Recording starts.
To stop recording
Press p on deck B or on the CD player.
16
Tips
• When you want to record on the reverse side,
press ª after pressing CD SYNC in step 5 so the
indicator on the ª button (for the reverse side)
lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse
side.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so "DOLBY NR B" appears in the
display.
• To record with the surround effect, press DSP so
"SUR
" appears in the display.
The equalizer settings will not be recorded.
Note
You cannot listen to other sources while recording.
Advertisement
Table of Contents
