Recording From The Radio - Sony LBT-VR90AV Operating Instructions Manual

Recording from the
radio
You can record a radio program on a tape by
tuning in a preset station. You can use TYPE I
(normal) or TYPE II (CrO
recording level is automatically adjusted.
1/u
(Power)
6
DOLBY NR
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
2
Press TUNING MODE repeatedly
until "PRESET" appears in the
display.
3
Press TUNING +/– to tune in the
desired preset station.
Preset number
18
) tapes. The
2
2
DSP
4 7
p
Frequency
4
Press PUSH 6 and insert a blank
tape into deck B.
1 3
5
Press r REC.
Deck B stands by for recording, and the
indicator on the · button (for the front
side) lights up green.
6
Press DIRECTION repeatedly until
A appears to record on one side or
ß (or RELAY) to record on both
sides.
7
Press P.
Recording starts.
To stop recording
5
ª
Press p on deck B.
Tips
• When you want to record on the reverse side,
press ª after pressing r REC in step 5 so the
indicator on the ª button (for the reverse side)
lights up green.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select "MANUAL"
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so "DOLBY NR B" appears in the
display.
• To record with the surround effect, press DSP so
"SUR
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
With the side you want to
record on facing forward
" appears in the display.