Table of Contents
Advertisement
Step 3: Setting the
time
You must set the time before using the timer
functions.
1
1
Press t/CLOCK SET.
The hour indication flashes.
2
Press TUNING +/– to set the hour.
3
Press ENTER/NEXT.
The minutes indication flashes.
4
Press TUNING +/– to set the
minutes.
5
Press ENTER/NEXT.
The clock starts.
Tip
If you make a mistake, start over from step 1.
Note
The clock setting is canceled when you disconnect
the power cord or if a power failure occurs.
10
3,5
2,4
Step 4: Presetting
radio stations
You can preset up to 30 stations, 20 for FM
and 10 for AM.
The bands you can select depend on the kind
of tuner built into your system. Confirm the
bands by pressing TUNER/BAND
repeatedly.
1/u
4
(Power)
1
Press TUNER/BAND repeatedly
until the desired band appears in
the display.
Each time you press this button, the
band changes as follows:
FM ˜ AM
2
Press TUNING MODE repeatedly
until "AUTO" appears in the
display.
2
5 1
3
Advertisement
Table of Contents
