The Cursor Does Not Correctly Follow The Pen Movements; Pen Input Not Working; The Notebook Cannot Be Started - Fujitsu LIFEBOOK T938 Operating Manual

Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Pen incorrectly calibrated

Pen input not working

Cause
Incorrect driver installed.
The pen is in power-saving mode.
The pen battery is completely discharged.

The notebook cannot be started

Notebook
Cause
The battery is not installed correctly.
The battery is dead.
The power adapter is not connected correctly.
92
Fault elimination
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "Setting the pen", Page 37
"Calibrating the pen", Page
Troubleshooting
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
► Press the pen button gently to wake the pen
from sleep mode.
► Insert the pen fully into its slot on the
notebook to charge the pen battery.
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
and
37.
Fujitsu