Working with the notebook
Connecting the notebook to the port replicator
► Disconnect the AC adapter cable from the DC jack (DC IN) of the notebook.
2
2
3
1
5
4
► Place the notebook on the port replicator so that the connector on the underside of
the notebook aligns with the connector on the port replicator (1).
► Press down on the notebook's rear corners so that it locks into position (2).
► Connect the AC adapter cable to the DC input connector (DC IN) of the port replicator (3).
► Connect the AC cable to the AC adapter (4).
► Plug the AC cable into the power outlet (5).
Fujitsu
59