The Cursor Does Not Correctly Follow The Pen Movements; Pen Input Not Working; The Notebook Cannot Be Started; The Notebook Stops Working - Fujitsu LIFEBOOK U9312X Operating Manual

The cursor does not correctly follow the
pen movements
Cause
Pen incorrectly calibrated

Pen input not working

Cause
The pen is in power-saving mode.
The pen battery is completely discharged.

The notebook cannot be started

Notebook
Cause
The battery is dead.
The power adapter is not connected correctly.

The notebook stops working

Energysaving mode Notebook
Cause
Notebook is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.
Fujitsu
Fault elimination
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "Setting the pen", Page 34
"Calibrating the pen", Page
Troubleshooting
► Press the pen button gently to wake the pen
from sleep mode.
► Insert the pen fully into its slot on the
notebook to charge the pen battery.
Troubleshooting
► Connect the notebook to the mains voltage
via the mains adapter and charge the
battery.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
Troubleshooting
► Leave energy saving mode.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
► Connect the notebook to the mains voltage
via the mains adapter and charge the
battery.
Troubleshooting and tips
34.
and
87