Connecting An External Monitor To The Port Replicator - Fujitsu LIFEBOOK T937 Operating Manual

Connecting an external monitor to the port replicator

An analog monitor is connected to the analog VGA monitor port, a digital monitor to the DisplayPort
or to the DVI-D monitor port on the optional port replicator. Monitor output is limited to a maximum of
two monitors at any one time (see
Monitorconnection Screenconnection VGAsocket Monitor
Digital DisplayPort
Digital DVI-D monitor port
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch back and forth between the external screen and the LCD
screen of the notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD screen simultaneously.
Fujitsu
"Key combinations", Page
Analog VGA monitor port
"Key combinations", Page
Connecting external devices
41, section "Toggle output monitor").
41.
71