Fujitsu LIFEBOOK T937 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LIFEBOOK T937
  6. Operating manual

Fujitsu LIFEBOOK T937 Operating Manual

Hide thumbs Also See for LIFEBOOK T937:
Table of Contents

Advertisement

Quick Links

Download this manual
System
Operating Manual
FUJITSU LIFEBOOK T937

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK T937

Summary of Contents for Fujitsu LIFEBOOK T937

  • Page 1 System Operating Manual FUJITSU LIFEBOOK T937...
  • Page 2 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright © 2017 Fujitsu America, Inc. All rights reserved B5FK-6471-01ENZ0-01...
  • Page 3 FUJITSU LIFEBOOK T937 Operating Manual Declarations of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
  • Page 4 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.

  • Page 5: Table Of Contents

    Fujitsu Contact Information ........
  • Page 6 Removing and installing components during servicing ....... . . 75 Fujitsu...
  • Page 7 Wireless LAN, Health and Authorization for use ........96 Fujitsu...
  • Page 8 Index ................. . 118 Fujitsu...

  • Page 9: Declarations Of Conformity

    Telephone: (408) 746-6000 Declares that product: Base Model Configuration: LIFEBOOK T937 Notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Page 10: Fujitsu Contact Information

    Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or Windows 10 operating system, you will need to go to the Support Site to download the FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".

  • Page 11: Notational Conventions

    Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

  • Page 12: Ports And Controls

    Notebook open 1 = Microphone 5 = Ambient light sensor 2 = Webcam 6 = Clickpad 3 = Webcam LED 7 = Clickpad buttons 4 = Windows button 8 = Fingerprint sensor Fujitsu...
  • Page 13 6 = SmartCard reader Right-hand side 1 = SD card slot 4 = HDMI port 2 = U S B 3 . 0 p o r t 5 = SIM card slot 3 = USB-C port 6 = VGA port Fujitsu...
  • Page 14 Ports and controls Bottom 1 = Speaker 3 = Battery Lock slider switch 2 = Battery compartment with SIM card 4 = Port for port replicator slot under the battery Fujitsu...

  • Page 15: Important Notes

    Wash your hands after using the device. This notebook complies with the relevant safety regulations for data processing equipment. If you have any questions about setting up your notebook in the intended environment, please contact your sales outlet or our Hotline/Service Desk. Fujitsu...

  • Page 16: Additional Safety Notes For Devices With Radio Components

    The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy saving functions as described in chapter "Using the energy saving functions", Page Fujitsu...

  • Page 17: Traveling With Your Notebook

    Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...

  • Page 18: Transporting The Notebook

    This situation may occur due to pre-operating system boot password security settings or some other application running on the notebook. • Attempting to transport the notebook while power is on may damage the notebook due to shock or overheating. Fujitsu...

  • Page 19: Cleaning The Notebook

    If the notebook is exposed to water or other liquids with its connections open, liquid can penetrate the notebook and cause a malfunction. Do not continue to use the notebook. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at: "http://www.fujitsu.com/us/support/"). Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu...

  • Page 21: Choose A Location

    ► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The First Time

    ► Slide the ON/OFF switch (1) to the right to switch on the notebook. The ON/OFF switch returns automatically to its original position. ► During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". Fujitsu...

  • Page 23: Installing Bonus Apps

    There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu...

  • Page 24: Working With The Notebook

    Please refer to the notes in the chapter "Important notes", Page Status indicators Statusindicators Symbols The status indicators provide information about the status of the power supply, the drives and the keyboard functions, etc. Fujitsu...
  • Page 25 The indicator is not lit up: There is no battery installed. Drive indicator The indicator is illuminated: The hard disk drive is being accessed. Radio components indicator • The indicator is illuminated: The radio components are switched on. • Indicator is off: The radio components are switched off. Fujitsu...

  • Page 26: Opening The Notebook

    Working with the notebook Opening the notebook ► Fold the LCD screen upwards. Fujitsu...

  • Page 27: Switching The Notebook On

    Control Panel - Hardware and Sound - Energy Options If you have assigned a password, you must enter this when requested to do so in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 28: Different Ways To Use Your Notebook

    Please note that the monitor cannot be turned completely on its own axis! Stop turning the monitor as soon as you feel resistance. No guarantee services can be offered for damage caused due to incorrect turning. From notebook to Tablet PC ► Raise the LCD screen into a vertical position. Fujitsu...
  • Page 29 At first you will feel some slight resistance, then the screen will turn easily and without friction. ► Turn the screen further until it has turned 180° and the hinge latches in. Fujitsu...
  • Page 30 Working with the notebook ► Now fold the screen down until the back of the screen is almost flat on top of the keyboard. The screen is now secured in the tablet position. Fujitsu...

  • Page 31: Select Display Orientation (Portrait Or Landscape Format)

    Operating the device in that position can result in damage to the antenna. Windows 7 You can change these settings in the Fujitsu menu or under Start - (Settings -) Control Panel - Hardware and Sound - Display - Settings.

  • Page 32: Switching Off The Notebook

    Switching off the notebook Notebook ► Close all applications and then shut down your operating system (please refer to the "Operating system manual"). ► Slide the power ON/OFF button towards the right. The power ON/OFF button returns automatically to its original position. Fujitsu...

  • Page 33: Closing The Notebook

    Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. Under Windows 10 you can set the required language under Control Panel – Time, Language and Region – Language. Fujitsu...

  • Page 34: Lcd Screen

    Dual Digitizer Technology. Please note: There are separate calibration programs available for calibrating the stylus and for calibrating finger-based operation. Do not use the calibration tool for the stylus to calibrate finger-based operation. Fujitsu...

  • Page 35: Using The Stylus

    The stylus can be influenced by electromagnetic fields (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the stylus down firmly. Fujitsu...
  • Page 36 You should also always repeat the calibration if the coordination between the stylus and the cursor movement deteriorates. Operating system Menu Windows 7 / Windows To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...
  • Page 37 You can secure the stylus with a stylus tether to prevent accidentally dropping it or losing it. ► Secure the end of the stylus tether with the smaller loop to your stylus. ► Secure the end of the stylus tether with the larger loop to your notebook. Fujitsu...

  • Page 38: Using The Device As A Notebook

    ► Tap the Clickpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Clickpad ► Tap the Clickpad twice or press the left button twice. The command is executed. Fujitsu...

  • Page 39: Keyboard

    The following illustration shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustration may differ from your device. Lock Fujitsu...
  • Page 40 1. Typeover mode: when typing, you overwrite the character at the current cursor position. 2. Insert mode: while typing, another character at the current cursor position is inserted, all characters right of the cursor will be shifted by one position. Fujitsu...
  • Page 41 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 42: Virtual Number Keys

    Further information about the status indicators can be found in chapter "Status indicators", Page Country and keyboard settings ► Make the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 43: Key Combinations

    This key combination decreases the brightness of the screen. Fn+F6 LCDscreen Screenbrightness Increasing the screen brightness This key combination increases the brightness of the screen. Fn+F7 Screenbrightness Decrease the volume This key combination reduces the volume of the internal speakers. Fn+F8 Volume Fujitsu...
  • Page 44 This key combination opens the Windows Security/Task Manager Ctrl window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab Shift stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Fujitsu...

  • Page 45: Tablet Buttons

    If the button is pressed in combination with the ON/OFF button, the function is the same as for the Ctrl Volume Up button This button increases the volume of the internal speakers. Volume Down button This button decreases the volume of the internal speakers. Fujitsu...

  • Page 46: Webcam

    The webcam automatically adjusts itself to the current light level. For this reason the LCD display may flicker while the light level is adjusted. Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam. Fujitsu...

  • Page 47: Rechargeable Battery

    Never store batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 48 ► Remove all the cables from the device. ► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an anti-slip cloth on this surface to prevent the device from being scratched. Fujitsu...
  • Page 49 ► Slide the Battery Lock slider switch in the direction of the arrow (1) and hold it in place. ► Slide the Battery Lock slider switch in direction of the arrow (2). ► Remove the battery compartment cover (3). ► Remove the battery from the battery compartment (4). Fujitsu...
  • Page 50 ► Slide the Battery Lock slider switch in direction of the arrow (3). The battery is secured. ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu...

  • Page 51: Using The Energy Saving Functions

    When you fold down and close the LCD screen, depending on the setting in Windows, the notebook automatically enters a power saving mode. The recommended settings for the Windows energy saving functions are predefined as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.

  • Page 52: Memory Cards

    ► Carefully slide the memory card into the slot. The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged. Memory card Depending on the particular type used, the memory card may protrude slightly from the slot. Fujitsu...

  • Page 53: Removing The Memory Card

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. You can find information on connecting headphones and a microphone in chapter "Connecting external devices", Page Fujitsu...

  • Page 54: Sim Card

    ► Insert the SIM card (2) in the SIM card carrier as shown symbolically on the SIM card carrier. ► Push the SIM card carrier back into its location (3). ► Install the rechargeable battery again, see "Installing a battery", Page Fujitsu...

  • Page 55: Removing A Sim Card

    "Installing a battery", Page Optional wireless LAN / Bluetooth / 4G wireless components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Depending on the system configuration ordered, your system will be equipped with wireless LAN, Bluetooth and / or 4G.

  • Page 56: Configuring Wlan Access

    • Integrated 4G module (availability dependent on model variant) • USB dongle (a USB stick containing a SIM card from your cellular phone network provider) • A mobile end-device (e.g. cellular phone with Bluetooth or cable connection) Fujitsu...

  • Page 57: Notes

    Working with the notebook Notes Fujitsu...

  • Page 58: Ethernet And Lan

    ► Connect the network cable to your network port. Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...

  • Page 59: Your Port Replicator (Optional)

    8 = Connector on the port replicator for the docking port on the bottom of the notebook 3 = LAN port 9 = Release 4 = Display Port 10 = ON/OFF button 5 = DVI port 6 = VGA monitor port Fujitsu...

  • Page 60: Setting Up The Port Replicator

    • Never place the port replicator and the mains adapter on a heat-sensitive surface. • Do not expose the port replicator to extreme environmental conditions. Protect the port replicator from dust, humidity and heat. Fujitsu...

  • Page 61: Connecting The Notebook To The Port Replicator

    ► Press down on the notebook’s rear corners so that it locks into position (2). ► Connect the AC adapter cable to the DC input connector (DC IN) of the port replicator (3). ► Connect the AC cable to the AC adapter (4). ► Plug the AC cable into the power outlet (5). Fujitsu...

  • Page 62: Switching On The Notebook Via The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the port replicator for approx. four seconds. The notebook will switch off. However, any unsaved data may be lost in the process. Fujitsu...

  • Page 63: Disconnecting The Notebook From The Port Replicator

    Working with the notebook Disconnecting the notebook from the port replicator ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...

  • Page 64: Security Functions

    If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance. Fujitsu...

  • Page 65: Brief Overview Of The Security Functions

    Brief overview of the security functions Detailed information about the security equipment of your system can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on our website at "http://www.fujitsu.com/us/support/". Security function Type of protection...

  • Page 66: Configuring The Fingerprint Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.

  • Page 67: Configuring Password Protection In Bios Setup Utility

    The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...

  • Page 68: Password Protection For Booting The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...

  • Page 69: Password Protection For The Hard Disk

    Do not use force when inserting and removing the Smart Card. Make sure that foreign objects do not fall into the Smart Card reader. ► Slide the Smart Card into the Smart Card reader with the chip facing upwards (or downwards depending on the device) and to the front. Fujitsu...

  • Page 70: Using The Security Function Of The Tablet Buttons

    Assigning the supervisor password ► Select Start - Run. ► Enter the following information in the prompt: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE. ► Confirm with Enter ►...

  • Page 71: Trusted Platform Module - Tpm (Device Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select the entry Disabled to disable the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The notebook will now reboot with TPM deactivated. Fujitsu...

  • Page 72: Connecting External Devices

    The HDMI port on your notebook can be used to connect an external amplifier, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Fujitsu...

  • Page 73: Connecting An External Monitor To The Port Replicator

    You can also switch back and forth between the external screen and the LCD screen of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD screen simultaneously. Fujitsu...

  • Page 74: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognized and installed by your operating system. Fujitsu...

  • Page 75: Usb Port With Charging Function (Anytime Usb Charge)

    ► With the left mouse button, click on the symbol in the taskbar for safe removal of hardware. ► Select the device you wish to shut down and remove. ► Press the "Enter" key. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 76: Headphones Port

    If you buy a cable from a retailer, please note the following information: The headphones port on your notebook is a "3.5 mm jack". If you want to connect headphones or speakers you will need a "3.5 mm jack plug". Fujitsu...

  • Page 77: Removing And Installing Components During Servicing

    Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorized opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Incaseofservice Components Fujitsu...

  • Page 78: Settings In Bios Setup Utility

    ► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service center. The BIOS Setup Utility starts. Fujitsu...

  • Page 79: Bios Setup Utility Operation

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 80: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 81: Troubleshooting And Tips

    ► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system.

  • Page 82: The Notebook's Date Or Time Is Incorrect

    The notebook’s LCD screen remains blank LCDscreen BlankLCDscreen Cause Troubleshooting Screen is switched off. ► Press a key or touch the Clickpad. External monitor or television set connected. ► Press the key combination for changing over the screen output, see "Key combinations", Page Fujitsu...

  • Page 83: The Lcd Screen Of The Notebook Is Difficult To Read

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...

  • Page 84: The Cursor Does Not Correctly Follow The Stylus Movements

    ► Charge the battery. ► Insert a charged battery. ► Connect the AC adapter to the notebook. The AC adapter is not connected properly. ► Check whether the AC adapter is properly connected to the notebook. ► Switch the notebook on. Fujitsu...

  • Page 85: The Notebook Stops Working

    The wireless component is switched on. Despite ► Check whether the wireless connection is this, the wireless connection to a network does enabled by the software. not work. ► Further information on using the wireless component can be found in the help files. Fujitsu...

  • Page 86: The Battery Discharges Too Quickly

    Supervisor PIN. Smart Card lost Cause Troubleshooting Smart Card lost. ► If you are working in a network, contact your system administrator, who can boot your notebook with a Supervisor Smart Card. Fujitsu...

  • Page 87: User And/Or Supervisor Smartcard Lost

    When testing the extended memory. an error has resulted at the address xxxx. Failure Fixed Disk n ► Start the BIOS Setup (Primary Master submenu) and select the correct settings. The settings of the hard disk drive are incorrect. Fujitsu...
  • Page 88 ► Contact your sales outlet or our customer service center. System cache error - Cache disabled ► Contact your sales outlet or our customer service center. System timer error ► Contact your sales outlet or our customer service center. Fujitsu...

  • Page 89: Technical Data

    1.5 kg / 3.31 lbs Input devices Keyboard 85 keys, with backlit keyboard Clickpad 2 keys Tablet buttons 1 Windows button, 2 volume buttons Stylus 1 freely programmable rocker button Slots Storage card slot 1 x SD Card Fujitsu...

  • Page 90: Wlan Specifications

    802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps • 802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps • 802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies Fujitsu...
  • Page 91 fixed length of 24 bits the user may however also set 40 or 104 bits. **** Depending on the particular practical application, the number of computers which can be networked is reduced if necessary. WWAN specifications Sierra Wireless EM7455 Type of Network– Fujitsu...

  • Page 92: Port Replicator (Optional)

    5℃ ..35℃ / 41°F ..95°F Transit temperature –15°C ..60°C / 5°F ..140°F Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". Rated voltage 14.4 V Rated capacity 45 Wh Rated power 3150 mAh The operating time depends on the device configuration, the active...

  • Page 93: Ac Adapter For Use Of The Notebook And Port Replicator

    80 W (adapter for port replicator only) Rated voltage 19 V Max. rated current • 3.42 A (adapter for notebook only) • 4.22 (adapter for port replicator only) An additional AC adapter or AC cable can be ordered at any time. Fujitsu...

  • Page 94: Manufacturer's Notes

    Remember – protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"...

  • Page 95: Ul Notice

    For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction. Fujitsu...

  • Page 96: Energy Star Compliance

    To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.

  • Page 97: Declarations Of Conformity

    This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu...

  • Page 98: Fcc And Ic Regulatory Information

    The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines. This device must not be co-located or operated in conjunction with any other antenna or transmitter. Fujitsu...

  • Page 99: Federal Communications Commission And Industry Canada Statement

    2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Fujitsu...

  • Page 100: Fcc Radio Frequency Exposure Statement

    Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user’s right to operate this equipment.

  • Page 101: Restrictions Concernant L'exportation

    : (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.

  • Page 102: Appendix

    54 Mbps in IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. • The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. • The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0. Fujitsu...

  • Page 103: Wireless Lan Modes Using This Device

    That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu...
  • Page 104 (e.g., file servers, printers, databases). * = An optional hub for a wired LAN may ** = ADSL modem, cable modem, or similar be required depending upon the type of access point used. Fujitsu...

  • Page 105: Deactivating/Disconnecting The Wlan Device

    (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected.) ► Press the key combination to deactivate the Wireless Device WirelessLAN WirelessLAN Bluetooth Bluetooth The wireless component indicator will go off when the wireless components are switched off. Fujitsu...

  • Page 106: Configuring The Wireless Lan

    After you have configured your computer, you can connect to an active network by performing the following steps: 1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Fujitsu...

  • Page 107: Troubleshooting The Wlan

    Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu...
  • Page 108 LAN device to associate but not authenticate to the wireless network. Incorrect IP address This only applies to networks configuration using static IP addresses. Please contact your network administrator for the correct settings. Fujitsu...

  • Page 109: Using The Bluetooth Device

    Users are not authorized to modify this product. Any modifications invalidate the warranty. This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.

  • Page 110: Image Backup And Recovery Procedures

    5. On Step 4, when the disc creation is completed, a message appears. Click Finishto exit the program. 6. Repeat Step 1: Select Recovery Disc from the list and repeat the above steps 2(a), 2(b), 2(c), 3, 4 and 5. Fujitsu...

  • Page 111: Creating A Backup Of The System-Specific Software Drivers

    To verify/change the boot-up priority (rather than booting-up from the hard drive or an external media drive), perform the following steps: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disc into the drive tray.
  • Page 112 1. Press the Diagnostics Toolbutton to start the Diagnostics tool. 2. Read the note, and then click OK. 3. Choose one or more of the following options for diagnostics on the Fujitsu Hardware Diagnostics Tool window: CPU, Memory, Display, Hard Disk, CD/DVD/BD, Floppy Disc, Keyboard, and Mouse.

  • Page 113: Windows 7

    The Partition Creation utility is used to change the C: and D: drive partition sizes. WARNING: It is highly recommended that you send your product to Fujitsu Service to replace a hard drive. A mistake could possibly destroy your computer, your new hard drive or both.)

  • Page 114: Recovering Your Recovery Image Using Recovery And Utility

    If you have installed a new hard drive or your hard drive is not bootable, perform the following steps. Note: You will need the Bootable disc and Recovery Image disc set for this recovery. 1. Power on your system. When the Fujitsu logo appears on the screen, press the key.

  • Page 115: Installing The Software After The Recovery Image Is Restored

    Bootable Disc, the computer does not need the essential access software. The recovery image already has the essential access software installed. 3. You can now connect to the Internet and download FSDM (Fujitsu Software Download Manager) from the support site and download all the software applicable to the model and OS using FSDM if they are not downloaded yet.

  • Page 116: Windows® 10 Procedures

    It is also important that you create a backup of the content of the C:\Drivers on your system to writable media or an external drive. System-specific software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft® page "http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options"...
  • Page 117 Fujitsu, you can use it to reinstall Windows. You will need to install additional drivers and applications after reinstalling Windows. To reinstall Windows, follow the steps below: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disc in your DVD drive.
  • Page 118 A message will be displayed during this time stating Please wait while the content is being processed. 6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability to auto install the software downloaded from the support site.

  • Page 119: Downloading Driver Updates

    To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions.

  • Page 120: Index

    Charge capacity, battery 45 First-time setup 18 Choose a location 19 Fn key 39 Clickpad 36, 41 Fn+F10 42 buttons 36 Fn+F2 41 Deactivating 41 Fn+F3 41 Dragging items 37 Fn+F4 41 Executing commands 36 Fn+F5 41 Moving the pointer 36 Fujitsu...
  • Page 121 51 Power saving 14 Microphone 51 Power-on indicator 25 Mobile operation 15 Printer does not print 83 Monitor Problem solving 79 connection 71 no image 81 remains blank 81 Radio components unstable image 81 Monitor connection Safety notes 14 Fujitsu...
  • Page 122 Switching between screen outputs 42 Wireless LAN Safety notes 14 Switching on for the first time 20 Symbols switching module off 53, 103 Indicators 22 switching module on 53, 103 System settings, BIOS Setup Utility 76 Wrong date/time 80 Tab key 38 Fujitsu...

Table of Contents