Table of Contents
Advertisement
Using PostScript 3
M
Select the file you want to print by pressing it.
N
Press [Print].
A confirmation screen appears.
If you have already set a password, proceed to the following step.
O
Enter a password using the number keys on the password screen, and then
press [OK]
A confirmation screen will appear if the password is not entered correctly.
Press [OK] to enter the password again.
3
If you have not set the password, proceed to the following step.
P
Press [Yes].
The stored print file is printed.
Note
❒ Press [Stop] to cancel printing.
❒ To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started,
the file is deleted.
❒ The Stored Print files sent to the machine are not deleted unless you delete
them in the machine or select [Auto Delete Stored Print Jobs] (see "System",
Printer Reference). For details, see p.87 "Deleting a Stored Print File".
If the application has a collate option, make sure it is not selected before send-
ing a print job. The printer driver collates the Stored Print files by default. If
a collate option is selected from the application's Print dialog box, there may
be more prints than required.
Windows 2000 / XP, Windows Server 2003, Windows NT 4.0
A
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
B
Right-click the printer icon, and then click [Printing Preference] on the com-
mand menu.
If you are using Windows 2000, select the printer, and then perform the fol-
lowing steps.
If you are using Windows XP or Windows Server 2003, select the printer, and
then click [Preferences].
C
Click the [Job Log] tab.
D
In the [Job Type:] list, click [Stored Print] or [Store and Print].
• [Stored Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Print]
Prints the file at once and also stores the file in the printer.
84
Advertisement
Table of Contents
