Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003) - Gestetner DSm755 Use

Windows Configuration
N
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
O
Click [Next >].
1
P
Specify whether or not to print a test page, and then click [Next >].
Q
Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation . For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the
DeskTop Binder-SmartDeviceMonitor port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer attached to this printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [Standard TCP/IP Port] in [Create a new port], and then click [Next >].
I
Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
18