Table of Contents
Advertisement
Windows Configuration
L
Click [Detailed Settings] to make necessary settings.
For information about the settings, see DeskTop Binder-SmartDeviceMonitor
for Client Help.
M
1
Click [OK].
N
Check that the name of the printer driver you want to install is selected, and
then click [Next >].
O
Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
P
Specify whether or not to print a test page, and then click [Next >].
Q
Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows NT 4.0 - TCP/IP)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Select [My Computer], and then click [Next >].
F
Click [Add Port...].
G
Click [DeskTop Binder-SmartDeviceMonitor], and then click [New Port...].
12
Advertisement
Table of Contents
