Table of Contents
Advertisement
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the name of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
L
Click [Detailed Settings] to configure proxy server, the IPP user name and oth-
er settings. Specify the necessary settings, and then click [OK].
For information about the settings, see DeskTop Binder-SmartDeviceMonitor
for Client Help.
M
Click [OK].
N
Check that the name of the machine whose driver you want to install is se-
lected, and then click [Next >].
O
Change the printer name if you want, and then click [Next >].
P
Specify whether or not to print a test page, and then click [Next >].
Q
Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.
Using the DeskTop Binder-SmartDeviceMonitor for Client Port
1
9
Advertisement
Table of Contents
