Table of Contents
Advertisement
Using PostScript 3
N
Press [Print].
A confirmation screen appears.
O
Press [Yes].
The hold print file is printed.
Note
❒ Press [Stop] to cancel printing.
❒ To cancel printing, press [Exit]. Then, press [Job Reset]. After it has started,
the file is deleted.
3
❒ When printing is finished, the stored file is deleted.
❒ If the application has a collate option, make sure it is not selected before
sending a print job. The printer driver automatically collates Hold Print
jobs by default. If a collate option is selected from the application's Print di-
alog box, there may be more prints than required.
Windows 2000 / XP, Windows Server 2003, Windows NT 4.0
A
In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
B
Right-click the printer icon, and then click [Printing Preference] on the com-
mand menu.
If you are using Windows 2000, select the printer, and then perform the fol-
lowing steps.
If you are using Windows XP or Windows Server 2003, select the printer, and
then click [Preferences].
C
Click the [Job Log] tab.
D
In the [Job Type:] list, click [Hold Print].
E
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-
Z, 0-9) characters. File Name can also be set.
The user ID associates the user with his / her jobs.
F
Click [OK] to close the printer properties dialog box.
If you are using Windows 2000, perform the following steps.
G
Start the printing from the application's [Print] dialog box.
The document file is saved in the machine.
To print the document, perform the following steps.
To delete the document, see p.82 "Deleting a Hold Print File".
H
On the machine's control panel, press the {Printer} key to display the printer screen.
80
Advertisement
Table of Contents
