Table of Contents
Advertisement
Section 3 - Configuration
IPv6 -
Autoconfiguration (SLAAC/DHCPv6)
My Internet
Select Autoconfiguration (SLAAC/DHCPv6) to have the DAP-1620
Connection is
automatically receive an IPv6 address from the uplink router.
Obtain a DNS
You can select to obtain IPv6 DNS server information automatically,
server address
or you can select to configure DNS servers manually by selecting
automatically
next to the option Use the following DNS address.
Primary DNS
For manual settings, enter the primary IPv6 DNS server address.
Server
Secondary DNS
For manual settings, enter the secondary IPv6 DNS server address.
Server
This is optional but will provide backup if the primary server fails.
My Internet
Select Static IPv6 to manually assign an IP address to the DAP-1620.
Connection is
IPv6 Address
Enter the IPv6 address that you want to assign to the extended
network AP. This address should be outside of the uplink router's
DHCP address pool.
Subnet Prefix
Enter the length of the IPv6 subnet prefix.
Length
Default Gateway
Enter the default gateway.
Primary DNS
Enter the primary IPv6 DNS server address.
Server
Secondary DNS
Enter the secondary IPv6 DNS server address. This is optional but
Server
will provide backup if the primary server fails.
Select Local Connectivity Only to set an IPv6 address only for the
My Internet
Connection is
local network.
LAN IPv6 Link-
The link-local address of the DAP-1620.
Local Address
D-Link DAP-1620 User Manual
IPv6 -
Static IPv6
IPv6 -
Local Connectivity Only
39
Advertisement
Table of Contents
