Gestetner DSm616 Facsimile Reference Manual page 101

B Select [On] or [Off], using { { { { U U U U } } } } or
{ { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
If you select [Off], proceed to
step D.
Note
❒ Selecting [Same as basic set-
tings] will result in the same
setting made for "Forward-
ing" under "Key Operator
Tools". See p.76 "Forward-
ing".
C Specify an End Receiver.
Use the Quick Dial key or the
{ { { { Search Destination} } } } key to spec-
ify an End Receiver.
D Press the { { { { OK} } } } key.
The display returns to that of
I
Step .
Note
❒ After you perform step
"Forwarding" of "Reception
Settings" to "On". See p.73
"Reception Settings".
Memory Lock
A Select [Memory Lock] using { { { { U U U U } } } }
or { { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
B Select [On] or [Off], using { { { { U U U U } } } } or
{ { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
The display returns to that of
Step
Note
❒ Selecting [Same as basic set-
tings] will result in the same
setting made for "Program
Memory Lock ID" under
"Key Operator Tools". See
p.79 "Memory Lock".
J J J J
Press [Exit].
A Special Sender has been pro-
grammed.
Note
❒ To program another sender, re-
peat the procedure from step
K K K K
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.
J
, set
Using Key Operator Settings
I
.
7
E
.
93