Whirlpool YWED92HEFC2 Installation Instructions Manual page 21

5.
Reinstall hinge and latch
on opposite sides
Using a T25 screwdriver, reinstall the latch plate and latch
®
backing plate with the three TORX
and the hinge assembly with the fi ve screws on the opposite
sides from which they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
screws removed earlier
®
Bottom
of door
7.
Reinstall door on dryer
Using a T25 screwdriver, remove the four screws on the
®
dryer. Insert the tabs on the hinge into the mounting slot
and slide down to engage the top tab. Secure in place
with the four screws removed earlier.
21