Whirlpool YWED92HEFC2 Installation Instructions Manual page 18

6.
Rotate and reassemble outer window
assembly to trim ring
Notches
With the edge with two notches at the top, align the notches
on the outer window assembly with the tabs on the trim ring
and lower into place as shown in fi gure A. Rotate the outer
window assembly counterclockwise to lock tabs into place
(fi gure B). Using a Phillips screwdriver, secure with two
screws removed earlier.
IMPORTANT: Do not overtighten.
18
7.
Remove hinge and latch
Bottom
of door
Fig. A
Using a T25
®
the latch plate and latch backing plate and the fi ve screws
holding the hinge assembly in place.
8.
Reinstall hinge and latch
on opposite sides
Fig. B
Using a T25 ®
backing plate, and hinge assembly on the opposite sides
from which they were removed.
Latch
screwdriver, remove the three screws securing
screwdriver, reinstall the latch plate, latch
Hinge