Whirlpool YWED92HEFC2 Installation Instructions Manual page 17

4.
Remove outer window assembly
from trim ring
Using a Phillips screwdriver, remove the two screws from the
outer window retainer and rotate the outer window assembly
clockwise until the square notches line up with the four tabs
on the trim ring indicated with arrows in the fi gure A above.
Then lift out the outer window and retainer up and off the trim
ring and set aside (B).
5.
Reverse outer window assembly
Handle
Fig. A
Fig. B
Using a Phillips screwdriver, remove the four screws from
the outer window retainer and lift the trim ring off the window
(A). Rotate trim ring 180° and secure with the four screws
removed earlier (B).
Fig. A
Handle
Fig. B
17