Listening to the Radio .... 23 Playing a USB Flash Drive ...... 25 Thank you for purchasing an Onkyo CD Receiver System. Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to Clock and Timer ......
WARNING: AVIS WARNING RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS The lightning flash with arrowhead symbol, within an TO RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
If water or any other liquid gets inside this unit, have it checked by your Onkyo This unit contains a semiconductor laser system and is dealer.
Page 4
For British models 1999/5/EF. Replacement and mounting of an AC plug on the power Hiermit erklärt Onkyo Corporation, dass sich das supply cord of this unit should be performed only by Gerät CR-245BT in Übereinstimmung mit den qualified service personnel.
Page 5
Direktiv 1999/5/EC. injury, or damage to the tweeter diaphragm. Hér með lýsir Onkyo Corporation því yfir að varan Using Close to a TV or Computer CR-245BT er í samræmi við grunnkröfur og aðrar TVs and computer monitors are magnetically sensitive kröfur sem gerðar eru í...
Package Contents Make sure you have the following items: When using the remote controller, point it toward the CD receiver’s remote control sensor, as shown below. CD Receiver (CR-245BT) CR-245BT Remote controller (RC-854C) Remote control sensor Indoor FM antenna Power cord (Connector type varies from country to country.) Speakers (D-T05) Speaker cables...
• FM tuner owned by Bluetooth SIG, Inc . and any use of such marks by Onkyo is under license. Other trademarks and trade names are • 30 FM presets those of their respective owners.
Page 8
Contents Getting Started Playing Your iPod/iPhone/iPad Important Safety Instructions........2 Playing Your iPod/iPhone/iPad........21 Precautions..............3 Playing an iPod/iPhone/iPad via USB....21 Package Contents ............. 6 Navigating the iPod Menus Using the Included Floor Pads for speakers..6 with the Remote Controller ........21 Using the Remote Controller .........
Getting to Know the CD receiver Top and Front Panels Top Panel Front Panel For detailed information, see the pages in parentheses. ON/STANDBY button (16, 22, 26, 27, 28) Headphones [ ] jack (16) Bluetooth PAIRING button (22) USB port (25) INPUT button (16, 22) Display Previous [...
—Continued Getting to Know the CD receiver Display SLEEP indicator TIMER indicators Play and Pause indicators Tuning indicators USB indicator RDS indicator Bluetooth indicators FILE indicator FOLDER indicator TRACK indicator S.BASS indicator Message area MUTING indicator DISC, TOTAL, and REMAIN indicators Playback mode indicators Rear Panel FM ANTENNA jack...
Disc (Audio CD and MP3) and USB Flash Drive (MP3) Notes Precautions for Playback Playback from USB Flash Drives Compact discs (CDs) with the following logo on the MP3 files recorded on a USB flash drive can be played label surface can be used. with the CD receiver.
—Continued Disc (Audio CD and MP3) and USB Flash Drive (MP3) Notes Precautions for Inkjet Printable Discs Caring for Discs Do not leave a CD-R/CR-RW having a label printed with If the disc is dirty, the CD receiver will have a hard time an inkjet printer in the CD receiver for a long time.
—Continued Connecting FM Antenna ■ Using a TV / FM Antenna Splitter It’s best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If circumstances demand it, use a TV / FM antenna TV / FM antenna splitter, as shown.
Connecting Other Components CD receiver Analog audio cable (RCA) Powered subwoofer To wall outlet (Connector type varies from e.g., country to country.) cassette tape deck About Connections Connecting an Audio Playback Device • Before making any connections, read the manuals supplied with your other components.
Basic Operations Selecting the Input Source This section describes the procedure for using the remote controller, unless otherwise specified. You can select CD, iPod (USB), FM, Bluetooth, or LINE, which can be an external component. Turning On the CD receiver To select the input source, use the remote controller’s Press the On/Standby [ ] button.
—Continued Basic Operations Adjusting the Bass and Treble Press the [BASS] or [TREBLE] button, and then use the [ ]/[ ] buttons to adjust the bass or treble, respectively. The default setting is “0”. You can adjust the bass and treble from –5 to +5.
Playing CDs Selecting Tracks This section describes the procedure for using the remote controller, unless otherwise specified. To return to the beginning of the track currently playing, press the Previous [ ] button. Playing CDs Press the Previous [ ] button repeatedly to select earlier tracks.
—Continued Playing CDs ■ Pausing Playback Selecting MP3 Files To pause playback, press the Play/Pause [ / ] button. The files on an MP3 CD can be located at the disc’s root To resume playback, press it again. level or within a folder. ■...
—Continued Playing CDs Random Playback Repeat Playback With random playback, all of the tracks on the disc are With repeat playback, you can play an entire CD played in random order. repeatedly or play one track repeatedly. Random playback can also be used in conjunction with Repeat playback can also be used in conjunction with repeat playback.
Playing Your iPod/iPhone/iPad Tip: This section describes the procedure for using the • When connecting your iPod/iPhone/iPad with a USB remote controller, unless otherwise specified. cable, we recommend you use an official USB cable • Before using your iPod/iPhone/iPad with the CD from Apple Inc.
Tip: enabled device, and then select the • Alternatively, you can use the remote controller’s “Onkyo CR-245BT” as the audio output device. [ /LINE] button. • The CD receiver can store the pairing information of up to 8 Bluetooth devices. If the pairing is done for the...
Listening to the Radio This section describes the procedure for using the Presetting FM Stations Automatically remote controller, unless otherwise specified. (Auto Preset) With the Auto Preset function, you can automatically Tuning into FM Radio Stations preset all of the FM radio stations available in your area When tuned to a station, the Tuned ( ) indicator in one go.
—Continued Listening to the Radio Presetting FM Stations Manually Receiving RDS With the Preset Write function, you can manually preset Press the [DISPLAY] button repeatedly to individual FM radio stations. Presets make it easy to display the following RDS information. select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations.
Playing a USB Flash Setting the Clock Drive This section describes the procedure for using the remote controller, unless otherwise specified. This section describes the procedure for using the remote controller, unless otherwise specified. Setting the Clock Press the [iPod] button to select “iPod”. Press the [TIMER] button repeatedly until Alternatively, you can use the CD receiver’s “Clock”...
Using the Timer This section describes the procedure for using the Use the arrow [ ]/[ ] buttons to select the remote controller, unless otherwise specified. source, and then press [ENTER]. You can select the following sources: The CD receiver has a programmable timer for FM, CD, iPod (USB), LINE.
—Continued Using the Timer Note: Turning Timer On and Off • If the timer turns the power on, the “SLEEP” Once a timer has been programmed, you can turn it on or indication will light. If you perform any operation, the off as necessary.
If you have any trouble using the CD receiver, look for a solution in this section. If you can’t resolve the issue yourself, try resetting the CD receiver before contacting your Onkyo dealer. To reset the receiver to its factory defaults, turn it on and, while holding down the CD receiver’s Previous [...
Page 29
—Continued Troubleshooting Audio performance. • Audio performance will be at its best about 10 to 30 minutes after the CD receiver has been turned on and had time to warm up. • Using cable ties to bundle audio cables with speaker or power cables may degrade the sound quality, so don’t do it. CD Playback The disc will not play.
—Continued Troubleshooting Bluetooth Bluetooth connection cannot be built. • When building a Bluetooth connection between the CD receiver and your device for the first time, if the connection is fail, you need to power off your device and power on again to clear the device name, and build the connection again (see page 22).
Page 31
CD receiver enters standby mode. Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.
Specifications Amplifier General × 15 W (6 Ω, 1 kHz, 2ch driven) Rated output power (IEC) 2ch Power supply AC 220 - 240 V, 50/60 Hz THD + N (total harmonic distortion + N ) Power consumption 30 W 10% (Power Rated) No-sound power consumption 7.9 W 0.5% (1 kHz 1W) (when not charging iPod/iPhone)