Memory Mode With The Document Feeder - Gestetner 5309L Operating Instructions Manual

D D D D
Press the { { { { Master Making} } } } key.
E E E E
Check the image position of the trial or proof print.
Note
❒ If the image position is not correct, adjust it using the { { { { Image Position} } } } keys
(see ⇒ p.21 "Shifting the Print Image Position Forward or Backward") or
the side tray fine adjusting dial (see ⇒ p.21 "Shifting the Print Image Posi-
tion to the Right or Left").
❒ After the first original has been stored, the second original is fed.
❒ If you set only one original, the beeper sounds after the first original has
been stored. Set the second original and the desired image settings. Then,
press the { { { { Master Making} } } } key.
F F F F
Enter the number of prints with the number keys.
G G G G
Make your prints.

Memory Mode with the Document Feeder

Note
❒ To prevent original misfeeds, do not set originals of different sizes.
❒ Do not set more than 30 originals at a time in the optional document feeder.
Printing Using the Optional Document Feeder
DRAFT 2002/08/02
2
59