Gigaset WIDEX W570A Manual page 53

Call is interrupted or completely disconnected
•
Radio signals are weakened by walls, ceilings, insulation etc.
metallic objects. Do not place the base in the cellar if possible (
Handsfree sound quality is not good
•
Dirt on the handset (e.g. make-up, dust, iron filings)
Loud crackling, background noises, interference, scratching, changing volume
•
Interference from other devices (network components of fax, PC, printer, mobile phone)
distance to other devices (at least half a metre) (
You cannot make calls and "BASE" or "No base" is flashing in the display
•
The power cable is not connected to the base:
"Not possible!" appears in the display
•
Telephoning externally is not possible whilst another external call is being made.
call has ended (does not apply if the internal listening function has been activated).
•
Making an external call whilst another party is speaking on your answer machine.
announcement on the answer machine has ended
Time is reset to the default setting
•
Base and handset were deactivated at the same time
No time is specified in the call list
•
Date/time is not set
The answer machine reports "Invalid PIN" during remote operation
•
The system PIN entered is incorrect
•
System PIN is still set to 0000
The answer machine does not record any messages or cancels the recording
•
The memory is full
•
Message is too short
The answer machine cancels the recording of a personal announcement
•
The memory is full
•
The announcement contained a pause of more than 2 seconds
•
The maximum recording time of 170 seconds has been exceeded
The answer machine has switched to announce only mode
•
The memory is full
Consultation call, call swapping, conference not possible.
•
These functions that can be executed on the device must be provided and enabled by the network pro-
vider. Operation can vary from one network provider to another.
Volume of the handset (earpiece volume) too quiet
•
The volume is at the lowest level
¥
Change the earpiece volume setting (
¥
Change the handset position on the ear
Handsfree volume too quiet
•
The volume is at the lowest level
You hear a tone during operation
•
Action has failed/invalid input
•
The batteries are empty
•
The system PIN you have entered is incorrect
You hear a tone during the call
•
The batteries are empty
Set date/time ( p. 11)
Enter the system PIN again
Set system PIN to something other than 0000 (
Delete old messages (
The caller must speak for longer than three seconds.
Listen to new messages (
Delete old messages (
Change the handsfree volume setting (
Repeat the process. Read the display and refer to the user guide
Charge the batteries (
Charge the batteries (
Do not place the base behind/beneath
p. 9)
Clean the handset (
p. 8)
Check the base power adapter (
Reset the time (
p. 31)
p. 30) and then delete (
Record a longer message
p. 31)
Contact your network provider
p. 44)
p. 11)
Re-enter the system PIN or reset (
p. 11)
Questions and answers
p. 54)
p. 9)
Wait until the other
Wait until the
p. 11)
p. 47)
p. 31)
Record a shorter message
p. 44)
p. 47)
Increase the
51