Storing A Program - Gestetner 10512 Copying Manual

Copying
Programs
You can store frequently used copy job settings in memory and recall them for
future use.
Note
❒ You can store up to 25 programs.
2
❒ You can select standard mode or program No. 25 as the mode to be set when
modes are cleared or reset, or immediately after the operation switch is
turned on. See p.126 "Change Initial Mode".
❒ Paper settings are stored based on size. So, if paper of the same size is set for
more than one tray, the paper tray prioritized with User Tools (System Set-
tings) will be selected first. See "Paper Tray Settings", General Settings Guide.
❒ Programs are not cleared by turning the power off or by pressing the { { { { Clear
Modes} } } } key. They are canceled only when you delete or overwrite them with
another program.

Storing a Program

A A A A
Edit the copy settings.
B B B B
Press the { { { { Program} } } } key.
C C C C
Press [Register].
D D D D
Press the program number you want to store.
Note
❒ Program numbers with m against them already have settings made for
them.
Reference
p.113 "Changing a stored program"
112
ZJAS040N