Table of Contents
Advertisement
RRU3942
Installation Guide
Procedure
Step 1 Prepare an RRU PGND cable.
1.
2.
Step 2 Install the RRU PGND cable.
Connect the M6 OT terminal at one end of the PGND cable to the ground terminal at the RRU
bottom and the M8 OT terminal at the other end to the external ground bar, as shown in
7-8.
Figure 7-8 Installing an RRU PGND cable
Crimp OT terminals in correct positions, as shown in
Figure 7-9 Correct position of an OT terminal
Issue ()
Cut the cable to the required length based on the actual cable route.
Add an OT terminal to each end of the cable by referring to Assembling the OT Terminal
and the Power Cable.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
7-9.
7 Installing RRU Cables
Figure
69
Advertisement
Table of Contents
