boytone BT-37WT-C Operating Instructions Manual page 10

Multi-speed turntable with am/fm radio, cassette player & mp3 encoding
Hide thumbs Also See for BT-37WT-C:
Table of Contents

Advertisement

1. Open the dust cover and turn the volume knob clockwise to turn the equipment on.
2. Use the function selector to select PHONO mode.
3. Set the speed selector to the appropriate position: 33, 45 or 78, depending on the record to
be played.
4. Set the auto stop control to ON if you want the turntable to stop turning when it has
reached the end of the record. If the switch is set to OFF, the turntable will continue turning
at the end of the record.
5. Place the record on the turntable (use the 45 rpm adaptor, if required).
6. Move the lift lever towards the back to raise the tone arm from the arm park, then slowly
move the arm to the record, as illustrated on the right. The turntable will start rotating.
7. Move the lift lever towards the front, the tone arm will gently drop onto the record and
playback will start.
8. To stop playback, move the lift lever towards the back to raise the tone arm. The turntable
will still be rotating but the record will stop playing. To continue playback, move the lift lever
towards the front.
9. To play a different piece on the record, move the lift lever towards the back, move the raised
tone arm to the start of the piece and then move the lift lever towards the front to lower the
tone arm and start playback.
10. To adjust the volume level, turn the volume knob to the right or left.
11. At the end of the record, move the lift lever towards the back to raise the tone arm and
move it back to the tone arm park, and then move the lift lever towards the front to lower
the arm onto its rest.
12. Alternatively, lift the tone arm off the record and return it to the arm rest manually.
13. When you have finished playing records, engage the tone arm lock to protect it from
accidental movement. Turn the volume knob in a counterclockwise direction to switch the
unit off.
Unplug it from the power supply if you are not going to use it for a while.
NOTE: Should your record stop before the last track finishes, set the auto stop control to OFF.

Advertisement

Table of Contents
loading

Table of Contents