AEG CIB6740ACB User Manual page 19

Symbol Oven function
Moist Fan Baking
9.3 Activating and
deactivating the top / main
oven
It depends on the model if
your appliance has knob
symbols, indicators or
lamps:
• The indicator comes on
when the oven heats up.
• The lamp comes on when
the oven operates.
• The symbol shows
whether the knob
controls one of the
cooking zones, the oven
functions or the
temperature.
1. Turn the knob for the top / main
oven functions to select an oven
function.
2. Turn the knob for the temperature to
select a temperature.
3. To deactivate the oven turn the knob
for the top / main oven functions to
the off position.
9.4 Activating the function:
Steam Bake
This function allows to have an
improvement of humidity during the
cooking.
Application
This function is designed to save energy during
cooking. For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. The oven door
should be closed during cooking so that the func-
tion is not interrupted and to ensure that the oven
operates with the highest energy efficiency possi-
ble. When you use this function, the temperature in
the cavity may differ from the set temperature. The
heating power may be reduced. For general energy
saving recommendations refer to "Energy Efficien-
cy" chapter, Energy Saving. This function was used
to comply with the energy efficiency class according
to EN 60350-1.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Do not open the appliance door
when using the function: Steam Bake.
• Open the appliance door with care
after using the function: Steam Bake.
Refer to "Hints and tips"
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
3. Turn the knob for the function: Steam
Bake
4. Turn the knob for the temperature to
select a temperature.
5. Put food in the appliance and close
the oven door.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
6. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
7. Remove water from the cavity
embossment.
ENGLISH
.
19