Placing Documents With The Protection Sheet - Plustek PS388U User Manual

5. Adjust the paper width slider to the card width. The paper width slider should be
gently touching both sides of the card.
Attention
P D
LACING OCUMENTS WITH THE
To avoid paper jam and documents be scratched, the protection sheet is designed
for you to load and protect special documents. It allows you to scan a document that is
not easy to load into the scanner. For example, paper with an odd (non-rectangular)
shape, wrinkles, curls, folds, as well as stamps, magazine and newspaper clippings.
You can also use the protection sheet when you scan photographs and valuable
documents so they won't be scratched. If the scanned images are not good enough,
please remove the pad module before you load the protection sheet.
1. Open the ADF cover by pulling the cover open lever.
Cover open lever
ADF cover
2. Remove the pad module by pressing the open knob of the pad module and pull
it out.
3. Close the ADF cover by pushing it back down until it snaps back into place.
12
Protection Sheet is not included in all scanner models.
Make sure the plastic cards you wish to scan
are horizontally loaded into the ADF.
Maximum thickness of each plastic card is 1.2
mm.
21
P
ROTECTION
12
S
HEET