EN60745: EC Declaration of Conformity Sound pressure level (L ) : 73 dB (A) Makita declares that the following Machine(s): Uncertainty (K) : 3 dB (A) Designation of Machine: The noise level under working may exceed 80 dB (A).
Page 3
The Technical file in accordance with 2006/42/EC is moving parts. Damaged or entangled cords available from: increase the risk of electric shock. Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use 22.8.2013 of a cord suitable for outdoor use reduces the risk of electric shock.
GEB088-1 19. Disconnect the plug from the power source and/or the battery pack from the power tool CORDLESS DRIVER DRILL before making any adjustments, changing SAFETY WARNINGS accessories, or storing power tools. Such preventive safety measures reduce the risk of Use auxiliary handle(s), if supplied with the starting the power tool accidentally.
ENC007-8 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all instructions checking function on the tool. and cautionary markings on (1) battery charger, (2) Installing or removing battery cartridge battery, and (3) product using battery.
Page 6
If the condition does not The tool will automatically stop during operation if the change, have the tool repaired by a Makita local tool and/or battery are placed under one of the following service center.
Page 7
Reversing switch action Selecting the action mode CAUTION: CAUTION: Always check the direction of rotation before Always set the ring correctly to your desired mode • • operation. mark. If you operate the tool with the ring Use the reversing switch only after the tool comes positioned halfway between the mode marks, the •...
Hook ASSEMBLY 1. Groove CAUTION: 2. Hook 3. Screw Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing side grip (auxiliary handle) 1. Protrusion 2.
Then attachment for its stated purpose. proceed as follows. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. CAUTION: Drill bits • Pressing excessively on the tool will not speed up Screw bits •...