Remove And Replace The Bottom Case - Toshiba TDP-P5 Service Manual

Remove and Replace the Bottom Case

The bottom case encloses the bottom half of the projector. When you replace the bottom case, you must
obtain a new bottom case label kit and rubber foot. The label kit contains all labels for the bottom case.
1 Remove the following items:
Lamp module (see page 7)
Top case (see page 9)
Leveling foot (see page 11)
Fan assembly (see page 14)
Controller ECA (partial removal) (see page 16)
Optical engine (see page 26)
Speaker (see page 30)
Ballast/power supply (see page 32)
Elevator foot (see page 38)
Elevator actuator (see page 40)
2 Lift the EMI shield from the bottom case. Place the shield aside for use with the replacement
bottom case. The shield is also available in the hardware kit (see page 83).
TDP-P5 Service Manual 42