Compact I/O Expansion Power Supplies
Mount a Power Supply on a DIN Rail
The power supply can be mounted using the following DIN rails:
• 35 x 7.5 mm (EN 50 022 - 35 x 7.5)
• 35 x 15 mm (EN 50 022 - 35 x 15)
1. Before mounting a power supply or module on a DIN rail, close the DIN rail latches.
2. Press the DIN rail mounting area of the module against the DIN rail.
The latches momentarily open and lock into place. The following illustration shows a
power supply being attached to the I/O modules in a DIN rail mounted Compact I/O
system.
1769 Cable
12
Rockwell Automation Publication 1769-IN028I-EN-P - July 2020