Operating The Wireless Mouse Remote Control - Sharp PG-D120U Operation Manual

Part Names
Transmission range
Max. distance: 23 (7 m)
30˚ 30˚
30˚
45˚
30˚ 45˚
30˚ 30˚
30˚

Operating the Wireless Mouse Remote Control

This remote control can be used for basic operations of the projector as well as operations of a connected com-
puter by using the wireless mouse functions and remote mouse receiver. Together with the laser pointer, this
can help you create a more professional presentation.
a. Connecting the projector to the computer
Connect the projector and the computer with the supplied computer cable. When using the remote mouse
receiver to operate the computer, connect the remote mouse receiver to the computer. See pages 25 and
26 for details on these connections.
CAUTION
• Always turn on the projector first, then the computer on.
b. Wireless Mouse Operation
1. After connecting the projector and the computer, turn them on.
2. Slide the MAIN POWER switch on the side of the remote control to ON.
3. When using the remote control as a wireless mouse, slide the MOUSE/ADJUSTMENT switch to the
MOUSE position. When using the remote control to operate the projector, slide the switch to the ADJ.
position.
CAUTION
• Do not connect or remove the mouse control cable and the computer cable to or from the computer while it is on. This
may damage the computer.
• The wireless mouse or RS-232C function may not operate if your computer port is not correctly set up. Please refer to the
operation manual of the computer for details on setting up/installing the correct mouse driver.
Reception range
Projector
Remote mouse
receiver
120˚
Remote control and remote mouse receiver
positioning
The remote control can be used to control the projec-
tor in the ranges shown on the left.
The remote mouse receiver can be used with the
remote control in the ranges shown to control the
mouse functions of a connected computer. (See
page 25 for details.)
• The signal from the remote control can be reflected off
the screen for easy operation. However, the effective dis-
tance of the signal may differ due to the screen material.
E-8