Table of Contents
Advertisement
Operating the Wireless Mouse Remote Control
1.
Slide the MAIN POWER switch on the side of the unit on.
2.
Press the POWER ON button on the front panel of the remote control to turn the projector power on.
3. When using the remote control as a wireless mouse, move the MOUSE/ADJUSTMENT sliding switch to the
MOUSE position. When using the remote control to operate the projector, move the MOUSE/ADJUSTMENT
sliding switch to the ADJ. position. To activate the remote control key back-light feature, press the LIGHT button
on the remote control. The colours of the buttons will change as shown in the table at the bottom of this page.
M U T E button, /
POWER ON/OFF
buttons
BLACK SCREEN/
LENS button
RIGHT-CLICWENTER -
INPUT SELECT -
buttons
INPUT CHECK button -
MOUSE label -
MOUSE/ADJUSTMENT -
switch
LIGHT button -
Using the remote control
in a dark room
Press the LIGHT button to turn
l
on the back-lights for the
operation buttons for about 5
seconds. The back-light colours
are explained in the table to the
right.
Note:
If the MAIN POWER switch on the remote control is left on
l
for more than 10 minutes without operation, the power will
automatically turn off. To turn the power back on, press any
button on the remote control for at least one second.
TRANSMIT indicator
When you change the setting of the MOUSE/ADJUSTMENT switch, the
functions of certain buttons on the remote control change. You can tell
which function the button currently possesses by the colour of its back-
light display.
I
Button narqe
LASER POINTER/MENU
RIGHT-CLICWENTER
MOUSE/ADJUSTMENT
LEFT-CLICK
BLACK SCREEN/LENS
POWER ON/OFF
VOLUME UP-DOWN
MUTE
VIDEO 1
V I D E O 2
DATA 1
DATA 2
I N P U T C H E C K
VOLUME UP-DOWN
buttons
MOUSE/ADJUSTMENT
Remote control handling precautions
The laser beam used in this product is harmless when
l
directed onto the skin, however please be careful not to
project the beam directly into the eyes. Do not stars into
the beam using an optical instrument.
high humidity.
The remote control-may not operate normally if exposed
to direct sunlight or other intense light sources. Should
this happen, &position the light soiree or the LCD
Position
MOUSE
LASER POINTER (GREEN) 1
RIGHT-CLICK (GREEN)
MOUSE (NOT LIT)
ON (NOT LIT)
BLACK SCREEN (GREEN)
MAIN POWER switch
of remote control
Note:
When transporting the
remote control, turn off
the MAIN POWER
switch to avoid draining
the batteries.
LEFT-CLICK button
of
MOUSE/ADJUSTMENT switch
ADJ.
MENU (RED)
ENTER (RED)
LENS (RED)
ON (RED)
.
I
Advertisement
Table of Contents
