KVH Industries TracVision R1ST User Manual page 36

4a. TracVision M5 Only - Adjust the LNB clockwise or
counter-clockwise, until the skew arrow on the LNB
points to the skew angle that you determined earlier.
Due to label constraints, if the skew angle is greater
than +15°, you need to subtract 180 to get the
equivalent negative skew angle and set the LNB to that
angle instead. For example, if the skew angle is
determined to be +30°, set the skew to -150°.
IMPORTANT!
Be sure to keep the LNB fully inserted in the choke feed to
ensure optimum performance.
Figure 3-6 TracVision M5 LNB Skew Angle Adjustment
LNB
Negative
Skews
0 Skew
TracVision M5/M7 User's Guide
Choke Feed
Positive
Skews
Chapter 3 - Settings
33