6
ASSEMBLING AND PREPARING
Setting up the Monitor
Attaching the Stand Base
1
Place the Monitor with the screen side down on
a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the
surface to protect the screen from damage.
2
Attach the Stand Base into the Monitor by
turning the Screw to the right.
Stand Body
Stand Base
CAUTION
This illustration depicts the general type of
y
connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down
y
holding only the stand base. The product
may fall and get damaged or injure your
foot.
Detaching the Stand Base
1
Place the Monitor with the screen side down on
a flat and cushioned surface.
2
Turn the screw to the left, and then pull out the
Stand Base from the Stand Body.
Detaching the Stand Body (Using
the Wall mount)
1
Remove 2 screws and pull out the Hinge Cover
from the Monitor.