Page 1
OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODELS E1951S E1951T E1951C E2251VR E2251VQ E2051S E2051T E2051C E2351VR E2351VQ E2251S E2251T E2251C E2351T E2351TC www.lg.com...
TABLE OF CONTENTS CONTENTS ASSEMBLING AND SPECIFICATIONS PREPARING Preset Modes (Resolution) Unpacking - HDMI Video Timing Parts and buttons Indicator Setting up the Monitor - Assembling the Stand Body and Base PROPER POSTURE - Mounting on a table Proper posture for using the Monitor. - Detaching the Stand Base and the Stand Body LICENSES...
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Parts and buttons Power Indicator Lighting On: Turned on Lighting Off: Turned off (Power Button) Button ("CUSTOMIZING SETTINGS" on page 14) E1951S E2051S E2251S E2251VR E2251VQ E1951C E2051C E2251C E2351VR E2351VQ DC-IN / HDMI D-SUB DC-IN /...
Page 5
For more information.(See p.18) AUTO Press the AUTO button on the MONITOR SETUP OSD menu to automatically adjust the screen. (Only supported in Analog Mode) The best display mode E1951S/ E1951T/ 1366 x 768 E1951C E2051S/ E2051T/ 1600 x 900 E2051C...
ASSEMBLING AND PREPARING Setting up the Monitor WARNING Assembling the Stand Body and Base If you do not fasten the screws, the monitor may fall, which may result in damage to the product. Place the Monitor with the screen side down on a flat and cushioned surface.
ASSEMBLING AND PREPARING Mounting on a table WARNING When you adjust the angle, do not hold the Lift and tilt the Monitor into its upright position bottom of the Monitor frame as shown on on a table. the following illustration, as it may injure your Leave a 10 cm (minimum) space from the wall fingers.
ASSEMBLING AND PREPARING Detaching the Stand Base and the Using the Kensington security system Stand Body The Kensington security system connector is located at the back of the Monitor. For more Place the Monitor with the screen side down on information of installation and using, refer to the a flat and cushioned surface.
If you use improper screws, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. VESA compatible only with respect to screw mounting interface dimensions and mounting...
Page 10
If you install the Monitor on a ceiling or slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount and contact a local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the Monitor and void your warranty.
D-SUB D-SUB connection Transmits analog video from your PC to the Monitor. Connect the PC and the Monitor with the supplied D-sub 15 pin signal cable as shown in the following illustrations. E1951S E2051S E2251S E1951C E2051C E2251C DC-IN /...
USING THE MONITOR SET DVI-D connection CAUTION Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor Connect the signal set with the DVI-D cable as shown the following input cable and tighten illustrations.
USING THE MONITOR SET HDMI connection Self Image Setting Function Press the power button on the front panel to turn Transmits the digital video and audio signals from the power on. When monitor power is turned on, your PC or A/V to the Monitor. Connect the PC or the "Self Image Setting"...
Different menu items are enabled depending on the type of input signal and model. Menu SUPER+ DUAL AUTO VOLUME INPUT EXIT RESOLUTION E1951S/ E2051S/ E2251S E1951C/ E2051C/ E2251C E1951T/ E2051T/ E2251T/ E2351T/ E2351TC E2251VR/ E2351VR (Analog/ Digital) E2251VR/ E2351VR (HDMI) E2251VQ/ E2351VQ (Analog/ Digital)
CUSTOMIZING SETTINGS Customizing Settings MENU Settings MENU Press any button on the front of the Monitor to display the BRIGHTNESS ORIGINAL RATIO WIDE MONITOR SETUP OSD menu. USER COLOR TEMP WARM PRESET Press the MENU button to display the options in the OSD menu.
Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG calculated these values by using “broadcast video signal”. LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel.
CUSTOMIZING SETTINGS SUPER+ RESOLUTION Settings SUPER+ RESOLUTION Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. NORMAL MEDIUM HIGH Press the SUPER+ RESOLUTION button to display the options in the OSD menu. EXIT Set the options by pressing ◄ or ► buttons.
CUSTOMIZING SETTINGS DUAL MONITOR Settings DUAL PACKAGE ► DUAL MONITOR Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. Press the DUAL button to display the options in the OSD menu. EXTENDED CLONE Set the options by pressing ▼ and then ◄ and ► buttons.
TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display y Check and see if the power cord is connected properly to the power connected? outlet. Is the power indicator light on? y Press the Power button.
Page 20
A Windows display driver is included on the CD. Or, you can also Have you installed the display driver? download the driver from our web site: http://www.lg.com. y Make sure to check if the video card supports Plug&Play function. The Audio function is not working Picture OK &...
0.3 mm x 0.3 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (Automatic) Input Form E1951S/ E1951C Separate Sync. E1951T Separate Sync. Digital Video Input Signal Input E1951S/ E1951C...
Page 22
SPECIFICATIONS E2051S E2051T E2051C Display Screen Type 50.805 cm (20.0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 50.805 cm Pixel Pitch 0.2766 mm x 0.2766 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (Automatic) Input Form...
Page 23
SPECIFICATIONS E2251S E2251T E2251C Display Screen Type 54.686 cm (21.53 inch) Flat Panel Active matrix-TFT Anti-Glare coating. Visible diagonal size: 54.686 cm Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (Automatic) Input Form...
Page 24
SPECIFICATIONS E2251VR E2251VQ Display Screen Type 54.686 cm (21.53 inch) Flat Panel Active matrix-TFT Anti-Glare coating. Visible diagonal size: 54.686 cm Pixel Pitch 0.248 mm x 0.248 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56 Hz to 75 Hz (D-SUB, DVI-D) 56 Hz to 61 Hz (HDMI)
Page 25
SPECIFICATIONS E2351T E2351TC E2351VR E2351VQ Display Screen Type 58.42 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.42 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency E2351T/ E2351TC 56 Hz to 75 Hz (Automatic)
PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor. Adjust the Monitor and your posture Adjust the location of to allow you to the Monitor to avoid it view images at the reflecting light. optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at...
LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Page 30
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible ENERGY STAR is a set of power-saving place for future reference. guidelines issued by the U.S.Environmental The model and serial number of the SET is Protection Agency(EPA).
Need help?
Do you have a question about the E1951S and is the answer not in the manual?
Questions and answers