Advertisement
Operation
Figure 4
gWave
TM
Controls
⑦
⑥
③
or "waving" in-front of the gWa-
ve
. "Waving" up will turn the unit
TM
On and "Waving" down will turn
the unit Off.
• The unit will turn on with the
same functions that it was set to
when it was turned Off and the in-
take temperature will be indicated
on the On Screen Display.
!
NOTE: When any button is
pressed the intake temperature will
be displayed on the On Screen Dis-
play for 5 seconds.
2.
Flame On/Off: Turns the flame
effect On or Off.
→ Activated by pressing the cor-
responding button on the remote
or "waving" in-front of the gWa-
ve
.
TM
⑩
⑪
LED Pilot Light
Gesture On/Off
• When On the flame effect is vis-
ible in the unit.
3.
Heat On/Off: Turns the heater
On or Off.
→ Activated by pressing the cor-
responding button on the remote
or holding your hand in-front of
the gWave
• Indicated by the icon and intake
temperature being illuminated on
the Floating Display™ and the
heater turning On or Off.
!
NOTE: The heater can be oper-
ated when the flame is not visible. In
this case the
①
②
④
⑥
⑧
⑩
for 3 seconds.
TM
icon will remain on
③
⑤
⑦
⑨
11
Advertisement
