THOMSON Speedtouch 580 Installation And Setup Manual page 19

Configuring the Internet
connection
E-DOC-CTC-20050429-0061 v2.0
Proceed as follows:
1
If prompted, enter the User name and Password for your SpeedTouch™
security settings and click OK.
The factory default user is 'Administrator'. Its password is blank,
meaning you do not have to enter anything in the password field. It is
advisable to specify another user name and password to protect your
SpeedTouch™ from security violation during the configuration
procedure (see
2
Select the appropriate Region, Provider and Service for your Internet
connection as specified by your service provider and click Next.
If the service provider has included a separate disk with a dedicated
service profile, click Have Disk... to browse to the location of the
appropriate service profile template file.
From here on the procedure might differ from the description below.
!
The requested information will depend on the selected service profile
and should be provided by your Service Provider. Subsequent screens
will guide you through the configuration setup of both the
SpeedTouch™ and your computer. Enter the requested information
and click Next whenever requested.
3
First your Internet connectivity will be set up:
Select the VPI/VCI - and, if required, the Connection Type - as specified
by your service provider and click Next.
Enter the User Name and Password for your Internet account settings as
specified by your service provider and click Next.
4
The procedure continues with some additional configurations.
Proceed with " Configuring the SpeedTouch™ (and your computer)" on
page 14.
"2.6 Basic Security" on page 26
Chapter 2
Basic Installation
for more information.
13