Cc3220 Boosterpack Module Header Pin Assignments - Texas Instruments CC3220-LAUNCHXL User Manual

www.ti.com
2.5.9 BoosterPack Module Header Pin Assignment
The TI BoosterPack module header pinout specification is at
The CC3220 LaunchPad kit follows this standard, with the exception of naming. (P1:P4 is used instead of J1:J4.) See
mapping assignments and functions.
+3.3 V
58 ANALOG_IN GPIO_03 *
4 UART_RX GPIO_13
3 UART_TX GPIO_12
61 GPIO GPIO_06
59 ADC_CH2 GPIO_04 *
5 SPI_CLK GPIO_14 *
62 GPIO GPIO_07
1 12C SCL GPIO_10
2 12C SDA GPIO_11
+5 V
GND
57 ANALOG_IN GPIO_02
60 ANALOG_IN GPIO_05
GPIO_03
58 ANALOG_IN
59 ANALOG_IN GPIO_04
63 I2C WS GPIO_08
53 12S SCLK GPIO_30
64 I2S SDout GPIO_09
50 12S SDin GPIO_00
NOTE: RESET output is an open-drain-type output and can only drive the pin low. The pullup ensures that the line is pulled back high when the
button is released. No external BoosterPack module can drive this pin low.
All the signals are referred to by the pin number in the SDK;
connector. For instance, pin 62 is available on P1 and P4, but only P1 is connected by default. The signal on P4 is marked with an asterisk (*) to
signify that it is not connected by default. The signal can be routed to the pin by using a 0-Ω resistor in the path. For the exact resistor placement,
see the CC3220 SimpleLink Wi-Fi Wireless MCU LaunchPad Board Design
SWRU463C – February 2017 – Revised March 2020
Submit Documentation Feedback
Build Your Own
J1
CC3220
Wi-Fi
NWP
J3
Figure 15. CC3220 BoosterPack Module Header Pin Assignments
Figure 15
Copyright © 2017–2020, Texas Instruments Incorporated
BoosterPack. Also see the
J2
J4
shows the default mappings. Some of the pins are repeated across the
Files.
CC3220 SimpleLink™ Wi-Fi
Hardware Description
BoosterPack Pinout Standard.
Figure 15 for CC3220 pin-
GND
GPIO_28 GPIO
GPIO_17 SPI CS Wls.
GPIO_31 GPIO
RST
GPIO_16 MOSI
GPIO_15 MISO
GPIO_25 MOSI
GPIO_01 MISO
GPIO_22 GPIO
OUT PWM
OUT PWM
NA PWM 17
IN PWM 64
OUT CCAP 21
NA CCAP/GPIO 18
OUT GPIO 62
OUT GPIO 60
IN GPIO 16
GPIO_24 GPIO 17
Copyright © 2017, Texas Instruments Incorporated
®
LaunchPad™ Development Kit Hardware
18
8
45
7
6
21
55
15
2
1
19