Table of Contents
Advertisement
3. Performing a Factory Reset
There are two methods to perform a factory default settings on this unit
management or reset manually.
3.1 Software Management:
Please first login into this unit using Username and Password, click on Tools
System Commands. You will find a Restore Defaults tab is showed on the screen.
Use this button to restore factory default configurations. Connectivity to the unit will be
lost, you can build reconnection after the unit reboots.
3.2 Reset Manually:
If you experience extreme problem or forgot your password, please press the reset
button with a pencil tip till the status led goes off, then release the reset button. After
20 seconds, the led will come back on and all of settings will become to factory
defaults.
AAM6020VI ADSL Wireless Modem Router Quick Installation Guide
16
Page
by software
Advertisement
Table of Contents
