Table of Contents
Advertisement
Getting Started
Hardware Installation
Please follow the steps in the sequence outlined below. Fail to do so could result in damage of
your ADSL wireless modem.
Step 1: Connect a RJ-11 cable from wall phone jack to the connector "LINE" on the back of
the modem.
Step 2: Connect the AC adapter to the modem by inserting the barrel-shaped connector into the
mating power connector on the back of the modem, and plug in the adapter to a wall outlet
or a power strip.
Step 3: Connect any LAN port on the back of the modem with a UTP cable, and other end of
UTP cable directly link to RJ-45 port of your PC's network card.
Step 4: Power on your PC and modem, now you are ready to configure PC.
Note: You can also use wireless interface to configure your modem, then please
directly proceed step 4 and make sure your wireless card driver has been installed
properly.
Caution: Please do not power on your PC and modem before connecting
steps are finished as mentioned above.
AAM6020VI ADSL Wireless Modem Router Quick Installation Guide
3
Page
Advertisement
Table of Contents
