Table of Contents
Advertisement
2.5.2 Configuring TCP/IP Properties
Windows ME
1. Select "TCP/IP -> ASUS USB SpaceLink Client".
2. Click Properties button and IP Address tab.
•
If your Access Point is connected to a network with a DHCP server,
the default setting "Obtain an IP address automatically" should work.
•
If your network does not automatically assign IP addresses, select
"Specify an IP address" and type in the IP address and Subnet Mask
as provided by your network administrator. If you want to route
traffic through an IP sharing device, you have to setup the ASUS
USB SpaceLink Client in the same Subnet as that of Access Point.
1. This works for DHCP enabled networks.
Windows XP
1. This works for DHCP enabled networks.
Chapter 2 - Installation
2. The numbers here are for example only.
2. If IP information is required, you can enter
it in the "Alternate Configuration" in XP.
ASUS USB SpaceLink Client
15
Advertisement
Table of Contents
