Configure Bmc Ip Source Static Ip - Asus ASMB6-IKVM User Manual

Server management board
Table of Contents

Advertisement

2.3.2

Configure BMC IP source static IP

1.
Repeat the step 1-4 in the previous sub-section.
2.
On reboot, the main menu appears. Select Configure BMC IP Source Static IP
for LAN1 (or DM_LAN1), and press <Enter> to enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for LAN1
Configure BMC IP Source DHCP for LAN1
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP for DM_LAN1
ASMB6 Firmware Update for Preserve Configuration (SDR,LAN,Username)
ASMB6 Firmware Update for Clear Configuration (SDR,LAN,Username)
3.
A confirmation message appears, asking if you want to configure the BMC IP
source static IP now. Select <Yes> to continue.
WARNING !!!
CONFIGURE BMC IP Source STATIC IP NOW !
DO YOU WANT TO CONTINUE ?
4.
When the configuration is completed, the below screen appears.
Detect Motherboard
Detect KCS Interface
New BMC IP Source : Static IP
Press any key to continue ...
5.
Go to BIOS menu to set the IP. Refer to section 2.4 for IP settings in BIOS
menu.
2-6
ASUS Server Z9PE-D16 MB
-> (Z9PE-D16 Series)
No
Yes
Chapter 2: Installation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents